Components
Assay plate
Standard
HRP-avidin (100 x concentrate)
Biotin-antibody (100 x concentrate)
Sample Diluent
HRP-avidin Diluent
Biotin-antibody Diluent
Wash Buffer (25 x concentrate)
TMB Substrate
Stop Solution
Adhesive Strip
Reagent Preparation
Biotin-antibody (1×) - Centrifuge the vial before opening.
HRP-avidin (1×) - Centrifuge the vial before opening.
Wash Buffer (1×) - If crystals have formed in the concentrate, warm up to room temperature and mix gently until the crystals have completely dissolved.
Standard - Centrifuge the standard vial at 6000-10000rpm for 30s.
Assay Precision
Intra-assay Precision (Precision within an assay): CV%<8% Three samples of known concentration were tested twenty times on one plate to assess.
Inter-assay Precision (Precision between assays): CV%<10% Three samples of known concentration were tested in twenty assays to assess.
Storage Comment
For unused kit: All the reagents should be kept according to the labels on vials. The Standard, Detection Reagent A, Detection Reagent B and the 96-well strip plate should be stored at -20 °C upon receipt while the others should be at 4 °C.
For used kit: When the kit is used, the remaining reagents need to be stored according to the above storage condition. Besides, please return the unused wells to the foil pouch containing the desiccant pack, and zip-seal the foil pouch.
Note
For unused kit: All the reagents should be kept according to the labels on vials. The Standard, Detection Reagent A, Detection Reagent B and the 96-well strip plate should be stored at -20 °C upon receipt while the others should be at 4 °C.
For used kit: When the kit is used, the remaining reagents need to be stored according to the above storage condition. Besides, please return the unused wells to the foil pouch containing the desiccant pack, and zip-seal the foil pouch.
Restrictions
For Research Use only