Human, Rhesus Monkey CXCL10 ELISA Kit, Lot 21AO-804 [Cancer Immune Checkpoint Assay Kit] (CAT#: IOK-05-P715)

Pre-Coated 96-well Strip Microplate
Wash Buffer
Stop Solution
Assay Diluent(s)
Lyophilized Standard
Biotinylated Detection Antibody
Streptavidin-Conjugated HRP
TMB One-Step Substrate

Distilled or deionized water
Precision pipettes to deliver 2 μL to 1 μL volumes
Adjustable 1-25 μL pipettes for reagent preparation
100 μL and 1 liter graduated cylinders
Tubes to prepare standard and sample dilutions
Absorbent paper
Microplate reader capable of measuring absorbance at 450nm
Log-log graph paper or computer and software for ELISA data analysis

20 pg/mL

100 μL

Pre-coated

Prepare all reagents, samples and standards as instructed in the manual. Add 100 μL of standard or sample to each well. Incubate 2.5 h at RT or O/N at 4 °C. Add 100 μL of prepared biotin antibody to each well. Incubate 1 h at RT. Add 100 μL of prepared Streptavidin solution to each well. Incubate 45 min at RT. Add 100 μL of TMB One-Step Substrate Reagent to each well. Incubate 30 min at RT. Add 50 μL of Stop Solution to each well. Read at 450 nm immediately.

-20 °C

The entire kit may be stored at -20°C for up to 1 year from the date of shipment. Avoid repeated freeze-thaw cycles. The kit may be stored at 4°C for up to 6 months. For extended storage, it is recommended to store at -80°C.

6 months

The entire kit may be stored at -20°C for up to 1 year from the date of shipment. Avoid repeated freeze-thaw cycles. The kit may be stored at 4°C for up to 6 months. For extended storage, it is recommended to store at -80°C.

For Research Use only

Interferon Gamma Induced Protein 10kDa (IP10)

CXCL10; C7; IFI10; INP10; IP-10; SCYB10; crg-2; gIP-10; mob-1; CRG-2; IP10; Ifi10; Scyb10; C-X-C motif chemokine ligand 10; C-X-C motif chemokine 10; chemokine (C-X-C motif) ligand 10; CXCL10; cxl10; Cxcl10

C-X-C motif chemokine 10 (10 kDa interferon gamma-induced protein) (Gamma-IP10) (IP-10) (Small-inducible cytokine B10)

574243

Q8MIZ1

1.Prepare all reagents, samples and standards as instructed in the manual.
2.Add 100 μL of standard or sample to each well.
3.Incubate 2.5 h at RT or O/N at 4°C.
4.Add 100 μL of prepared biotin antibody to each well.
5.Incubate 1 h at RT.
6.Add 100 μL of prepared Streptavidin solution to each well.
7.Incubate 45 min at RT.
8.Add 100 μL of TMB One-Step Substrate Reagent to each well.
9.Incubate 30 min at RT.
10.Add 50 μL of Stop Solution to each well.
11.Read at 450 nm immediately.