Human IL6R ELISA Kit, Lot 21AO-1355 [Cancer Immune Checkpoint Assay Kit]
CAT#: IOK-05-P1266
Product Type: ELISA Kit
Target: IL-6 Receptor
Short Description
The kit is designed for in vitro quantitative measurement of Human IL6R in Cell Culture Supernatant, Plasma, Serum.
Description
The kit is a sandwich enzyme immunoassay technique for the in vitro quantitative measurement in various sample types.
Applications
ELISA
Target
IL-6 Receptor
Reactivity
Human
Detection Method
Colorimetric
Method Type
Sandwich ELISA
Analytical Method
Quantitative
Sample Type
Cell Culture Supernatant, Plasma, Serum
Specificity
This kit recognizes Human IL-6R in samples. No Significant cross-reactivity or interference between Human IL-6R and analogues was observed.
Components
Pre-coated, ready to use 96-well strip plate Plate sealer for 96 wells Standard Sample/Standard Dilution Buffer Biotin-labeled Antibody (Concentrated) Antibody Dilution Buffer HRP-Streptavidin Conjugate (SABC) SABC Dilution Buffer TMB Substrate Stop Solution Wash Buffer (25 x concentrate) Instruction manual
Sensitivity
18.75 pg/mL
Sample Volume
100 μL
Assay Time
3.5 h
Plate
Pre-coated
Reagent Preparation
1.Bring all reagents to room temperature (18-25 °C) before use. 2.Wash Buffer: Dilute 30 mL of Concentrated Wash Buffer with 720 mL of deionized or distilled water to prepare 750 mL of Wash Buffer. 3.Standard working solution: Add 1.0 mL of Reference Standard &Sample Diluent, let it stand for 10 min and invert it gently several times. After it dissolves fully, mix it thoroughly with a pipette. This reconstitution produces a working solution of 200pg/mL. 4.Biotinylated Detection Ab working solution: Centrifuge the Concentrated Biotinylated Detection Ab at 800xg for 1 min, then dilute the 100x Concentrated Biotinylated Detection Ab to 1x working solution with Biotinylated Detection Ab Diluent. 5.HRP Conjugate working solution: Calculate the required amount before the experiment.
Assay Precision
Intra-assay Precision (Precision within an assay): 3 samples with low, mid range and high level Human IL-6R were tested 20 times on one plate, respectively. Inter-assay Precision (Precision between assays): 3 samples with low, mid range and high level Human IL-6R were tested on 3 different plates, 20 replicates in each plate. Both intra-CV and inter-CV are < 10 %.
JAK-STAT Signaling, Autophagy, Growth Factor Binding, Cancer Immune Checkpoints
Protocol
1.Add 100 μL standard or sample to each well. Incubate for 90 min at 37 °C. 2.Remove the liquid. Add 100 μL Biotinylated Detection Ab. Incubate for 1 hour at 37 °C. 3.Aspirate and wash 3 times. 4.Add 100 μL HRP Conjugate. Incubate for 30 min at 37 °C. 5.Aspirate and wash 5 times. 6.Add 90 μL Substrate Reagent. Incubate for 15 min at 37 °C. 7.Add 50 μL Stop Solution. Read at 450 nm immediately.